The BD-904 Model is a laboratory oven capable of providing highly-stable, controlled, forced hot air circulation. BD-904 Laboratory Ovens are standard laboratory ovens that provide dry, air-circulated heat as an environmental testing condition.
CONSTRUCTION. These laboratory ovens feature a durable powder-coat finish over heavy-gauge steel, with stainless steel internal construction, and highly-efficient, low K factor, thermal insulation, this is built to last for many years.
CIRCULATION SYSTEM. The ability to maintain precise temperatures occur with help from direct, drive-powered fans. The performance level operates the internal workspace temperature from +38°C* to +220°C (100.4°F to +428°F).
HEATING SYSTEM. The oven features an industry-leading heating system equipped with low-watt density, ceramic core, nichrome heaters for accurate temperatures within ±0.5°C, as measured at the sensor.
BD Series Laboratory Ovens are ideal for:
- and more.
INSTRUMENTATION. The standard BD models have a manual-set digital controller. For more sophisticated test profiles, upgrade incorporates AESONE CONNECT creating a robust connected device giving you a standard and uniform interface that makes operation easier. Learn more in the Instrumentation Tab below.
With the popularity of rapid cooling, BD-904 Models have spawned a standard liquid-cooled model. Take a look at BD-100 Model Laboratory Ovens to incorporate liquid LN2 or CO2 cooling or cryogenic cooling into your laboratory oven.
- Standard Features
- Safety Features
- Optional Features
|Interior:||18.0W x 18.0D x 22.0H (in)|
|457.2W x 457.2D x 558.8H (mm)|
|Exterior:||25.6W x 26.3D x 38.1H (in)|
|650.3W x 668.1D x 967.8H (mm)|
|Volume:||4.13 cubic ft|
|Temperature:||38°C to 220°C (100.4°F to 428°F)|
|Electrical Supply:||120 VAC, 1 PH, 60 HZ|
|Full Load Amps:||22 A|
|Power Requirement:||NEMA L5-30|
|Refrigeration System:||No active cooling|
|Mobility:||Will fit through 36 in doorway|
|Approximate Product Weight:||260.0 lbs (118 kg) without added options|
|Approximate Shipping Weight:||370.0 lbs (168 kg) without added options|
*Rise and pull-down rates calculated using IEC 60068-3-5 standard. Custom options available.
- Temperature Range: approximately +38°C to +220°C (100.4°F to +428°F)
- Exterior cabinet: cold-rolled steel, heavy-gauge, powder coat finish, color: bone
- Interior cabinet: stainless steel, type 304
- Forced air circulation
- Port configuration: left wall access port and plug with 3in (76.2mm) diameter
- Port configuration: right wall access port and plug with 3in (76.2mm) diameter
- Fully opening door, manual door latch
- Fully Adjustable shelf, 1 wire-grid shelf, stainless steel
Temperature is manually set with one Watlow EZ-ZONE PM controller (non-programmable)
BD Series Test Chambers can incorporate AESONE CONNECT creating a robust connected device for a standard and uniform interface making test chamber operation easier.
AESONE XCHANGE increases your functionality
- Connects the test chamber controller to your network for increased accessibility
- On-board multi-year data logging
AESONE SOFTWARE gives you the power to
- Remote chamber operation and monitoring,
- Web-based test profile creation,
- Viewing current data and historical data visually
- Secure multi-level user access
WATLOW F4T PROGRAMMABLE CONTROLLER. Features a 4.3” capacitive touchscreen minimizing the chance for error. Ethernet communication supported by AESONE HARDWARE. View more controller options
ADDITIONAL ONBOARD INSTRUMENTATIONSENSORS. 100 OHM Platinum RTD is a highly-accurate sensor made from platinum components for increased sensitivity View sensor options
STANDARD SAFETY FEATURE
HIGH/LOW TEMPERATURE CONTROL. An adjustable temperature limit controller allows you to program the highest lowest temperature the device under test, protecting products from compromising temperature exposure.
- Shelf Modification
- Custom Porting Sizes
- Additional Blank Door
- LN2 Cooling (standard in BD-100)
- CO2 Cooling (optional in BD-100)
- Desiccant Air Dryer to ensure conditions as low as 5% RH
- Gas Purge compatible with Dry Nitrogen (GN2) & Compressed Dry Air (CDA)
- Floor Stand w/ Casters
Please Try Again.