BenchtopRack and Stack
The SCH-512-4, also known as the Super 512, is the most powerful temperature and humidity benchtop test chamber in the world. Designed for precision and accuracy, this test chamber is engineered to meet the most demanding testing requirements across a wide range of industries.
If you are concerned about losing your lab counter space, this test chamber has an optional floor stand for one chamber, or get double the test workspace when you stack two SC test chambers in the same footprint.
STRUCTURE. The internal workspace is lined with type 304 stainless steel for a vapor-tight internal construction. The exterior has a durable powder-coat finish over heavy-gauge steel for a long-lasting clean look. Between the two layers is highly-efficient, low k-factor, thermal insulation. This chamber is built to last for many years.
CIRCULATION SYSTEM. Air circulation is crucial for environmental testing. The SCH-512-4 Test Chamber has a proprietary baffle and fan design combination. This optimizes temperature and humidity conditions within the workspace.
HEATING SYSTEM. SCH test chambers feature heating systems equipped with open ceramic-core nichrome heaters for reliable and accurate temperature control within ±0.5°C.
COOLING SYSTEM. The cooling system in the SCH series consists of a self-contained mechanical refrigeration system with a single stage configuration and a 3.5 HP scroll compressor. An optional water-cooled condenser is available.
Add boost cooling with liquid LN2 or CO2 to shorten pull-down times; it's a great option for stress tests that require rapid cooling.
INSTRUMENTATION. SCH-512-4 Test Chamber incorporates AESONE CONNECT® creating a robust connected device giving you a standard and uniform interface that makes operation easier. Learn more in the Instrumentation Tab below.
- Standard Features
- Safety Features
- Optional Features
|Interior:||36W x 24.1D x 25.8H (in)|
|914.4W x 612.1D x 655.3H (mm)|
|Exterior:||82W x 38D x 36H (in)|
|2082.8W x 965.2D x 914.4H (mm)|
|Volume:||12.95 cubic ft|
|Temperature:||-37°C to 180°C (-34.6°F to 356°F)|
|Humidity:||10-95% RH, limited by +4°C Td (for 98% add option)|
|Humidity Fluctuation:||±2% RH at sensor|
|Pull Down Rate*:||5°C/min|
|Electrical Supply:||208 VAC, 1 PH, 60 HZ|
|Full Load Amps:||50 A|
|Power Requirement:||Non-NEMA L6-50 Plug|
|Refrigeration System:||Single stage|
|Mobility:||Will fit through 48 in doorway|
|Approximate Product Weight:||920 lbs (417 kg) without added options|
*Rise and pull-down rates calculated using IEC 60068-3-5 standard. Custom options available.
SCH Series Test Chambers have incorporated AESONE CONNECT creating a robust connected device for a standard and uniform interface making test chamber operation easier.
AESONE XCHANGE is hardware internal to the chamber that increases your functionality
- Connects the test chamber controller to your network for increased accessibility
- On-board multi-year data logging
- On-board pressure and temperature monitoring of refrigeration system via AES XCHANGE
AESONE SOFTWARE gives you the power to
- Remote chamber operation and monitoring,
- Web-based test profile creation,
- Viewing current data and historical data visually
- Secure multi-level user access
ADDITIONAL ONBOARD INSTRUMENTATION
WATLOW F4T PROGRAMMABLE CONTROLLER. Features a 4.3” capacitive touchscreen minimizing the chance for error. Ethernet communication supported by AESONE HARDWARE. View more controller options
- TEMPERATURE SENSOR. Measured at the point of airflow entering the workspace. Class A, 3-wire, 100 Ohm Platinum RTD sensor
- Solid-State Humidity Sensor
OPTIONAL DATA LOGGERS. View additional data loggers
STANDARD SAFETY FEATURES
- Custom Porting Sizes
- Custom window size
- Heater for Window
- LN2 Boost Cooling
- CO2 Boost Cooling
- Desiccant Air Dryer to ensure conditions as low as 5% RH
- Dry Nitrogen Purge to keep condensation and frost from accumulating on DUT surfaces at cold temperatures and to prevent oxidation of metals surfaces at high temperatures
- Battery testing safety features
Please Try Again.