<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=235002737667895&amp;ev=PageView&amp;noscript=1">
SD-508-4-ATP Environmental Testing Chamber
Illustration of man next to  for scale
Illustration of man next to  for scale
 Environmental Testing Chamber
Illustration of man next to  for scale
Illustration of man next to  for scale

SD-508-4-ATP

BenchtopRack and Stack

TUVRheinland icon Benchtop Stackable icon

The SD-508-4-ATP, also known as the Super 508, is the most powerful temperature-only benchtop test chamber in the world. Designed and engineered to work seamlessly with ATPHEAVY, a battery fixture that can test 8 batteries up to 1000 amps per channel, the Super 508 can outperform any standard benchtop-style test chamber while still allowing safe and easy access into your workspace.  

If you are concerned about losing your lab counter space, this test chamber has an optional floor stand for one chamber, or get double the test workspace when you stack two SD test chambers in the same footprint.

STRUCTURE.  The internal workspace is lined with type 304 stainless steel for a vapor-tight internal construction. Two specialized ports allow for cable patches to feed through the back of the test chamber workspace and easily connect to your battery cycler test equipment.

The exterior has a durable powder-coat finish over heavy-gauge steel for a long-lasting clean look. Between the two layers is highly-efficient, low k-factor, thermal insulation. This chamber is built to last for many years.

CIRCULATION SYSTEM.  Air circulation is crucial for environmental testing. The Super 508 has a proprietary baffle and fan design combination. This optimizes temperature conditions within the workspace for the ATPHEAVY battery fixture. 

HEATING SYSTEM.  SD test chambers feature heating systems equipped with stainless steel tubular fin heaters for reliable and accurate temperature control within ±0.5°C.

COOLING SYSTEM.  The cooling system in the Super 508 consists of a self-contained mechanical refrigeration system with a single stage configuration, and an air-cooling condenser. An optional water cooled condenser is available.  

Add boost cooling with liquid LN2 or CO2 for even faster pull-down rates. It's a great option for stress tests that require rapid cooling.  

Even without boost cooling, AES’ standard refrigeration systems have the fastest standard change rates of any environmental test chamber manufacturer. See Basic Specifications tab below. 

INSTRUMENTATION. SD-508-4-ATP Test Chamber incorporates AESONE CONNECT creating a robust connected device giving you a standard and uniform interface that makes operation easier. Learn more in the Instrumentation Tab below.

ALTERNATIVE TEMPERATURE RANGES:

  • SD-208 -70°C to +180°C (-94°F to +356°F)
Buy $39,160 (base price)
Show More...
  • Specifications
  • Standard Features
  • Instrumentation
  • Safety Features
  • Optional Features
  • Downloads

Specifications

Interior: 24W x 24.1D x 25.8H (in)
  609.5W x 612.1D x 655.3H (mm)
Exterior: 70W x 38D x 36H (in)
  1778W x 965.2D x 914.4H (mm)
Volume: 8.64 cubic ft
  244.65 liters
Temperature: -37°C to 180°C (-34.6°F to 356°F)
Rise Rate*: 5°C/min
Pull Down Rate*: 5°C/min
Electrical Supply:  208 VAC, 1 PH, 60 HZ
Full Load Amps: 40 A
Power Requirement: Non-NEMA L6-50 Plug
Refrigeration System:  Single stage
Mobility: Will fit through 48 in doorway
Approximate Product Weight: 555 lbs (252 kg) without added options
Approximate Shipping Weight: 665 lbs (302 kg) without added options

*Rise and pull-down rates calculated using IEC 60068-3-5 standard. Custom options available.

Specifications

STANDARD FEATURES

  • Temperature range: -35°C to 120°C (-40°F to +356°F)
  • External cabinet construction consists of heavy-gauge, cold-rolled steel with powder coat, bone color, and textured matte finish
  • Internal workspace constructed with type 304 stainless steel
  • Full opening door with adjustable manual latch
  • Interior light with exterior switch on cabinet face and operable on AESONE CONNECT
  • Port configuration: two rear wall access ports 4 in (101.6 mm) diameter with plugs and four rear wall ports 2 in (50.8 mm) diameter for additional sensors
  • Forced air circulation

Instrumentation

STANDARD INSTRUMENTATION

CONTROLLER   AESONE CONNECT allows for secure remote access to your test chamber and gives easy profile creation, operational control, and data management.

SD Series Test Chambers have incorporated AESONE CONNECT creating a robust connected device for a standard and uniform interface making test chamber operation easier.

AESONE XCHANGE is hardware internal to the chamber that increases your functionality

  • Connects the test chamber controller to your network for increased accessibility
  • On-board multi-year data logging

AESONE SOFTWARE gives you the power to

  • Remote chamber operation and monitoring, 
  • Web-based test profile creation, 
  • Viewing current data and historical data visually
  • Secure multi-level user access 

ADDITIONAL ONBOARD INSTRUMENTATION

WATLOW F4T PROGRAMMABLE CONTROLLER. Features a 4.3” capacitive touchscreen minimizing the chance for error. Ethernet communication supported by AESONE HARDWARE. View more controller options

SENSORS.

  • TEMPERATURE SENSOR. Measured at the point of airflow entering the workspace. Class A, 3-wire, 100 Ohm Platinum RTD sensor
  • View sensor options

OPTIONAL DATA LOGGERS. View additional data loggers

Safety Features

STANDARD SAFETY FEATURES

  • HIGH/LOW TEMPERATURE CONTROL. An adjustable temperature limit controller allows you to program the highest lowest temperature the device under test, protecting products from compromising temperature exposure.
  • Refrigeration system over-pressure safety circuit
  • TUV Rheinland certified meeting UL-508A
  • BATTERY SAFETY FEATURES

    • Emergency stop button
    • Chamber alarm input
    • Chamber alarm output
    • Audible and visual alarm

Optional Features

  • Custom Porting Sizes
  • Custom window size
  • Heater for Window
  • LN2 Boost Cooling
  • CO2 Boost Cooling
  • Water Cooled Condenser
  • Desiccant Air Dryer to ensure conditions as low as 5% RH 
  • Dry Nitrogen Purge to keep condensation and frost from accumulating on DUT surfaces at cold temperatures and to prevent oxidation of metals surfaces at high temperatures
  • Battery testing safety features

Downloads