The SD-512-4-ATP is designed and engineered to work seamlessly with ATPHEAVY, a battery fixture that can test 8 batteries up to 1000 amps per channel.
If you are concerned about losing your lab counter space, this test chamber has an optional floor stand for one chamber, or get double the test workspace when you stack two SD test chambers in the same footprint.
STRUCTURE. The internal workspace is lined with type 304 stainless steel for a vapor-tight internal construction. Two specialized ports allow for cable patches to feed through the back of the test chamber workspace and easily connect to your battery cycler test equipment.
The exterior has a durable powder-coat finish over heavy-gauge steel for a long-lasting clean look. Between the two layers is highly-efficient, low k-factor, thermal insulation. This chamber is built to last for many years.
CIRCULATION SYSTEM. Air circulation is crucial for environmental testing. The SD-512-4-ATP has a proprietary baffle and fan design combination. This optimizes temperature conditions within the workspace for the ATPHEAVY battery fixture.
HEATING SYSTEM. SD test chambers feature heating systems equipped with stainless steel tubular fin heaters for reliable and accurate temperature control within ±0.5°C.
COOLING SYSTEM. The cooling system in the SD-512-4-ATP consists of a self-contained mechanical refrigeration system with a single stage configuration, and an air-cooling condenser. An optional water cooled condenser is available.
Add boost cooling with liquid LN2 or CO2 for even faster pull-down rates. It's a great option for stress tests that require rapid cooling.
Even without boost cooling, AES’ standard refrigeration systems have the fastest standard change rates of any environmental test chamber manufacturer. See Basic Specifications tab below.
INSTRUMENTATION. SD-512-4-ATP Test Chamber incorporates AESONE CONNECT creating a robust connected device giving you a standard and uniform interface that makes operation easier. Learn more in the Instrumentation Tab below.
ALTERNATIVE TEMPERATURE RANGES:
|Interior:||36W x 24D x 25.8H (in)|
|914.4W x 609.5D x 655.3H (mm)|
|Exterior:||88.25W x 40.5D x 36.8H (in)|
|2241.6W x 1028.7D x 934.8H (mm)|
|Volume:||12.9 cubic ft|
|Temperature:||-37°C to 120°C (-34.6°F to 248°F)|
|Pull Down Rate*:||4°C/min|
|Electrical Supply:||208 VAC, 1 PH, 60 HZ|
|Full Load Amps:||40 A|
|Power Requirement:||Non-NEMA L6-50 Plug|
|Refrigeration System:||Single stage|
|Mobility:||Will fit through 48 in doorway|
*Rise and pull-down rates calculated using IEC 60068-3-5 standard. Custom options available.
SD Series Test Chambers have incorporated AESONE CONNECT creating a robust connected device for a standard and uniform interface making test chamber operation easier.
AESONE XCHANGE is hardware internal to the chamber that increases your functionality
AESONE SOFTWARE gives you the power to
WATLOW F4T PROGRAMMABLE CONTROLLER. Features a 4.3” capacitive touchscreen minimizing the chance for error. Ethernet communication supported by AESONE HARDWARE. View more controller options
OPTIONAL DATA LOGGERS. View additional data loggers
Please Try Again.