FD-227 Model is a floor-style temperature-only environmental test chamber.
STRUCTURE. The internal workspace is lined with type 304 stainless steel for a vapor-tight internal construction. The exterior has a durable powder-coat finish over heavy-gauge steel for a long-lasting clean look. Between the two layers is highly-efficient, low k-factor, thermal insulation. This chamber is built to last for many years.
CIRCULATION SYSTEM. Air circulation is crucial for environmental testing. The FD-227 Test Chamber has a proprietary baffle and fan design combination. This optimizes temperature conditions within the workspace.
HEATING SYSTEM. FD test chambers feature heating systems equipped with open ceramic-core nichrome heaters for reliable and accurate temperature control within ±0.5°C.
COOLING SYSTEM. The cooling system in the FD-227 consists of a self-contained mechanical refrigeration system with a cascade configuration, and an air-cooling condenser. An optional water cooling-condenser is available.
Add boost cooling with liquid LN2 or CO2 for even faster pull-down rates. It's a great option for stress tests that require rapid cooling. Even without boost cooling, AES’ standard cascade refrigeration systems have the fastest standard change rates of any environmental test chamber manufacturer. See Basic Specifications tab below.
INSTRUMENTATION. FD Series Test Chambers have incorporated the AESONE CONNECT creating a robust connected device for a standard and uniform interface making operation easier. Learn more in the Instrumentation Tab below.
ALTERNATIVE TEMPERATURE RANGES:
Interior: | 36W x 36D x 36H (in) |
91.5W x 91.5D x 91.5H (mm) | |
Exterior: | 54W x 72D x 75.5H (in) |
1371.6W x 1897.5D x 1917.7H (mm) | |
Volume: | 27 cubic ft |
764.56 liters | |
Temperature: | -65°C to 180°C (-85°F to 356°F) |
Rise Rate*: | 3.88°C/minute |
Pull Down Rate*: | 1.5°C/minute |
Electrical Supply: | 208VAC or 230VAC, 3PH, 60HZ, |
Full Load Amps: | 50A |
Power Requirement: |
Hardwired
|
Mobility: | Will fit through 62" door |
*Rise and pull-down rates calculated using IEC 60068-3-5 standard. Custom options available.
Interior Cabinet: Stainless Steel, Type 304
Exterior Cabinet: Cold Rolled Steel, Heavy-Gauge, Powder Coat finish, Color: Bone
Multipane Viewing Window: 12 x 12 in.
Heated Window (Standard on -65°C Models Only)
Internal Light with External Switch
Port Configuration: 1 Right Side Port, with 3in (76.2mm) Diameter
Locking Swivel Casters, set of 4
FD Series Test Chambers have incorporated AESONE CONNECT creating a robust connected device for a standard and uniform interface making test chamber operation easier.
AESONE XCHANGE increases your functionality
AESONE SOFTWARE gives you the power to
WATLOW F4T PROGRAMMABLE CONTROLLER. Features a 4.3” capacitive touchscreen minimizing the chance for error. Ethernet communication supported by AESONE HARDWARE. View more controller options
SENSORS. 100 OHM Platinum RTD is a highly-accurate sensor made from platinum components for increased sensitivity View sensor options
OPTIONAL DATA LOGGERS. View additional data loggers