<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=235002737667895&amp;ev=PageView&amp;noscript=1">

FD Series -

FD-521 - Temperature Only

FD-521 Model is a floor-style temperature-only environmental test chamber. 

STRUCTURE.  The internal workspace is lined with type 304 stainless steel for a vapor-tight internal construction. The exterior has a durable powder-coat finish over heavy-gauge steel for a long-lasting clean look. Between the two layers is highly-efficient, low k-factor, thermal insulation. This chamber is built to last for many years.

CIRCULATION SYSTEM.  Air circulation is crucial for environmental testing. The FD-521 Test Chamber has a proprietary baffle and fan design combination. This optimizes temperature conditions within the workspace. 

HEATING SYSTEM.  FD test chambers feature heating systems equipped with open ceramic-core nichrome heaters for reliable and accurate temperature control within ±0.5°C.

COOLING SYSTEM. The cooling system in the is FD-521 consists of a self-contained, compact, single-stage, mechanical refrigeration system with an air-cooled condenser. An optional water cooling condenser is available.

Add boost cooling with liquid LN2 or CO2 to shorten pull-down times; it's a great option for stress tests that require rapid cooling.

INSTRUMENTATION.  FD Series Test Chambers have incorporated the AESONE CONNECT creating a robust connected device for a standard and uniform interface making operation easier. Learn more in the Instrumentation Tab below.

ALTERNATIVE TEMPERATURE RANGES:

  • FD-221 -65°C to 180°C (-85°F to 356°F)

Contact us for quote
Show More...
  • Specifications
  • Standard Features
  • Instrumentation
  • Safety Features
  • Optional Features
  • Downloads

Specifications

Interior: 32W x 32D x 32H (in)
  81.5W x 81.5D x 81.5H (mm)
Exterior: 41.5"W x 49.5"D x 76.5"H (in)
  1054.1W x 1257.3D x 1943.1H (cm)
Volume: 18.962 cubic ft
  536.95 liters
Temperature: -37°C to 180°C (-35°F to 356°F)
Rise Rate*: 3.88
Pull Down Rate*: 1.38
Electrical Supply:  208VAC or 230VAC, 3PH, 60HZ,
Full Load Amps: 34A
Power Requirement: Hardwired
Mobility: Will fit through 48" door

*Rise and pull-down rates calculated using IEC 60068-3-5 standard. Custom options available.

Specifications

  • Interior Cabinet: Stainless Steel, Type 304
  • Exterior Cabinet: Cold Rolled Steel, Heavy-Gauge, Powder Coat finish, Color: Bone
  • Multipane Viewing Window: 12 x 12 in.
  • Heated Window (Standard on -65°C Models Only)
  • Internal Light with External Switch
  • Port Configuration: 1 Right Side Port, with 3in (76.2mm) Diameter
  • Locking Swivel Casters, set of 4

Instrumentation

STANDARD INSTRUMENTATION

CONTROLLER

FD Series Test Chambers have incorporated AESONE CONNECT creating a robust connected device for a standard and uniform interface making test chamber operation easier.

AESONE XCHANGE increases your functionalityaesone-connect-1

  • connects the test chamber controller to your network for increased accessibility
  • on-board multi-year data logging

AESONE SOFTWARE gives you the power to

  • remote chamber operation and monitoring, 
  • web-based test profile creation, 
  • viewing current data and historical data visually
  • secure multi-level user access 

ADDITIONAL ONBOARD INSTRUMENTATION

WATLOW F4T PROGRAMMABLE CONTROLLER. Features a 4.3” capacitive touchscreen minimizing the chance for error. Ethernet communication supported by AESONE HARDWARE. View more controller options

SENSORS. 100 OHM Platinum RTD  is a highly-accurate sensor made from platinum components for increased sensitivity View sensor options

OPTIONAL DATA LOGGERS. View additional data loggers

Safety Features

  • Adjustable Digital Set Limit Controller Indicating High-Temperature Safety
  • Over Temperature Heat Fusing
  • Refrigeration System Over Pressure Safety Circuit
  • TUV Rheinland Certified Meeting UL 508A, US, C, E

Optional Features

  • Shelf Modification (placement, size, number)
  • Custom Porting Sizes
  • Custom window size
  • Noise Reduction Package
  • LN2 Boost Cool
  • CO2 Boost Cool
  • Water Cooled Condenser
  • Desiccant Air Dryer to ensure conditions as low as 5% RH 
  • Dry Nitrogen Purge to keep condensation and frost from accumulating on DUT surfaces at cold temperatures and to prevent oxidation of metals surfaces at high temperatures
  • Variable Speed Fan*

Downloads