FDP-564 Model is the high-performance version of AES' popular sister model, also a 64 cubic foot (1812 liter) working volume, floor-standing environmental test chamber with temperature and humidity.
STRUCTURE. The internal workspace is lined with type 304 stainless steel for a vapor-tight internal construction. The exterior has a durable powder-coat finish over heavy-gauge steel for a long-lasting clean look. Between the two layers is highly-efficient, low k-factor, thermal insulation. This chamber is built to last for many years.
PERFORMANCE. Test your product faster with a 15hp single-stage compressor combined with a suggested water-cooled condensing system. With average pull-down times of 8°C/minute and average ramp rates of 10°C/minute. AES chambers allow you to maximize product testing efficiency without sacrificing quality.
HEATING SYSTEM. FDP-564 test chambers feature heating systems equipped with open ceramic-core nichrome heaters for reliable and accurate temperature control within ±0.5°C.
COOLING SYSTEM. The cooling system in the FDP-564 consists of a self-contained mechanical refrigeration system with a cascade configuration, and an air-cooling condenser. An optional water cooling-condenser is available.
Add boost cooling with liquid LN2 or CO2 for even faster pull-down rates. It's a great option for stress tests that require rapid cooling. Even without boost cooling, AES’ standard cascade refrigeration systems have the fastest standard change rates of any environmental test chamber manufacturer. See Basic Specifications tab below.
INSTRUMENTATION. FDP-564 Series Test Chamber incorporates the AESONECONNECT creating a robust connected device for a standard and uniform interface making operation easier. Learn more in the Instrumentation Tab below.
|Interior:||48W x 48D x 48H (in)|
|121.9W x 121.9D x 121.9H (mm)|
|Exterior:||102W x 110.5D x 105H (in)|
|2590.8W x 2806.7D x 2667H (mm)|
|Volume:||64 cubic ft|
|Temperature:||-20°C to 100°C (-4°F to 212°F)|
|Pull Down Rate*:||10°C/minute|
|Electrical Supply:||480VAC, 3PH, 60HZ,|
|Full Load Amps:||75 Amps|
*Rise and pull-down rates calculated using IEC 60068-3-5 standard. Custom options available.
*Heat Rise Rate: empty chamber stated above
• Dead load performance 8°C/minute from ambient to +85°C, with 100lb (45.36kg) load, 60% steel/40% PCB
• Live load performance will increase with active live load during heat transition
*Cooling Pull-Down Rate: empty chamber stated above
• Dead load performance 8°C/minute, from +50°C to 0°C, with 200lb (45.36kg) load, 60% steel/40% PCB
• Live load performance 2°C/minute, from +50°C to 0°C, with 4kw active live load, during cool transition
*Rise and Pull-down rates calculated using IEC 60068-3-5 standard. Custom humidity setpoints under live load available.
FDP Series Test Chambers feature a 24" monitor mounted to the front of the test chamber. But don't let that force you to stand at the chamber. AES|XCHANGE is included allowing you to operate, monitor, and analyze data while your products are under test.
FDP Series Test Chambers have incorporated AESONE CONNECT creating a robust connected device for a standard and uniform interface making test chamber operation easier.
AESONE XCHANGE increases your functionality
AESONE SOFTWARE gives you the power to
WATLOW F4T PROGRAMMABLE CONTROLLER. Features a 4.3” capacitive touchscreen minimizing the chance for error. Ethernet communication supported by AESONE HARDWARE. View more controller options
SENSORS. 100 OHM Platinum RTD is a highly-accurate sensor made from platinum components for increased sensitivity View sensor options
OPTIONAL DATA LOGGERS. View additional data loggers