<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=235002737667895&amp;ev=PageView&amp;noscript=1">

FDR Series -

FDR-501 - Temperature Only

Overview

The FDR-501 test chamber offers the ability to test frequency generating devices within a shielded environment, effectively shielded frequencies from entering inside and from escaping out of the test chamber workspace.

an independent test facility to certify attenuation. Your chamber comes with a test report showing attenuation performance.

Powerful and Consistent Radio Frequency Blocking

  • Cellular, metallic, chromatic gaskets and conductive adhesives create a sealed workspace
  • RF Honeycomb shielded grill keeps the circulation motor cool
  • Electrical wires into the working volume travel through special RF filters
  • Standard and Customer requested RF-rated connectors are installed on a side-mounted interface plate providing a shielded pass-through grid for communication with the device under test. (DUT)
  • Temperature range -37°C to +94°C (-34.6°F to +201.2°F)
  • Wide attenuation range encompassing many products
  • Independently certified for accuracy

STRUCTURE.  The internal workspace is lined with type 304 stainless steel for a vapor-tight internal construction. The exterior has a durable powder-coat finish over heavy-gauge steel for a long-lasting clean look. Between the two layers is highly-efficient, low k-factor, thermal insulation. This chamber is built to last for many years.

CIRCULATION SYSTEM.  Air circulation is crucial for environmental testing. The FDR-501 Test Chamber has a proprietary baffle and fan design combination. This optimizes temperature conditions within the workspace. 

HEATING SYSTEM.  FDR test chambers feature heating systems equipped with open ceramic-core nichrome heaters for reliable and accurate temperature control within ±0.5°C.

COOLING SYSTEM. The cooling system in the is FDR-501 consists of a self-contained, compact, single-stage, mechanical refrigeration system with an air-cooled condenser. An optional water cooling condenser is available.

Add boost cooling with liquid LN2 or CO2 to shorten pull-down times; it's a great option for stress tests that require rapid cooling.

INSTRUMENTATION.  FDR Series Test Chambers have incorporated the AESONE CONNECT creating a robust connected device for a standard and uniform interface making operation easier. Learn more in the Instrumentation Tab below.

Specifications

Interior: 25.5W x 32D x 41H (in)
  1,333.5W x 815D x 1040H (mm)
Exterior: 26"W x 32"D x 41"H (in)
  647.7W x 812.8D x 1041.4H (cm)
Volume: 1.13 cubic ft
  31.86 liters
Temperature: -37°C to 94°C (-34.6°F to 201.2°F)
Rise Rate*: 3.14
Pull Down Rate*: 1
Electrical Supply:  120VAC, 1PH, 50HZ or 60HZ,
Full Load Amps: 20
Power Requirement: NEMA 5-20
Mobility: Will fit through 32" door

*Rise and pull-down rates calculated using IEC 60068-3-5 standard. Custom options available.

Standard Features

  • Interior Cabinet: Stainless Steel, Type 304
  • Exterior Cabinet: Cold Rolled Steel, Heavy-Gauge, Powder Coat finish, Color: Bone
  • Internal Light with External Switch
  • Locking Swivel Casters, set of 4
  • Full Opening Door, Manual Door Latch, Blank (No Window)

Instrumentation

STANDARD INSTRUMENTATION

CONTROLLER

FDR Series Test Chambers have incorporated AESONE CONNECT creating a robust connected device for a standard and uniform interface making test chamber operation easier.

AESONE XCHANGE increases your functionalityaesone-connect-1

  • connects the test chamber controller to your network for increased accessibility
  • on-board multi-year data logging

AESONE SOFTWARE gives you the power to

  • remote chamber operation and monitoring, 
  • web-based test profile creation, 
  • viewing current data and historical data visually
  • secure multi-level user access 

ADDITIONAL ONBOARD INSTRUMENTATION

WATLOW F4T PROGRAMMABLE CONTROLLER. Features a 4.3” capacitive touchscreen minimizing the chance for error. Ethernet communication supported by AESONE HARDWARE. View more controller options

SENSORS. 100 OHM Platinum RTD  is a highly-accurate sensor made from platinum components for increased sensitivity View sensor options

OPTIONAL DATA LOGGERS. View additional data loggers

Safety Features

We offer multiple types of safeties on our test chambers to help protect your product and your test chamber if anything malfunctions.

  • Thermal Heat Fuse - interrupts the flow of electricity if it reaches a certain temperature
  • Digital Set High-Temperature Safety - shuts down the test chamber if it goes over a certain temperature

Optional Features

  • Shelf Modification (placement, size, number)
  • LN2 Boost Coo l
  • CO2 Boost Cool
  • Custom Port Configuration and Attachments
  • Noise Reduction Package
  • High/Low-Temperature Safety - manual-control, digital-set temperature safety shuts-down test chamber if it goes over or below a specified temperature