FUSION-24-032-3200
Benchtop
The FUSION-24-032-3200, is a chamber cycler and fixture product all in one.
- Specifications
- Standard Features
- Instrumentation
- Safety Features
Specifications
| Interior: | 36W x 24.1D x 25.8H (in) |
| 914.4W x 612.1D x 655.3H (mm) | |
| Exterior: | 88.5W x 40D x 36H (in) |
| 2247.9W x 1016D x 914.4H (mm) | |
| Volume: | 12.95 cubic ft |
| 366.7 liters | |
| Temperature: | 20°C to 80°C (-4°F to 176°F) |
| Rise Rate*: | 5°C/min |
| Pull Down Rate*: | 5°C/min |
| Electrical Supply: | 208 VAC, 1 PH, 60 HZ |
| Full Load Amps: | 50 A |
| Facility Power Receptacle: |
6' cord with 2-Pole 3-Wire Grounding, Non-NEMA, Twist lock plug. CATALOG# CS8265C
|
| Refrigeration System: | Single stage |
| Mobility: | Will fit through 48 in doorway |
*Rise and pull-down rates calculated using IEC 60068-3-5 standard. Custom options available.
*Ideal ambient temperature conditions for test chambers is 23°C (73.4°F). The temperature and humidity range of assured performance is between 15°C and 25°C (59°F/77°F) and 30-50% relative humidity. Conditions outside this range may affect the performance of your test chamber and reduce the lifespan of the equipment.
Notice for Customers Requesting R449A:
Consult our sales team regarding the use of R449A refrigerant (where applicable). This substitution ensures compliance with relevant regulations. Please be aware that the use of R449A will change the achievable low temperature to -35°C. Our sales team can provide detailed information regarding this change for your specific application.
Standard Features
STANDARD FEATURES
- External cabinet construction consists of heavy-gauge, cold-rolled steel with powder coat, bone color, and textured matte finish
- Interior cabinet constructed with type 304 stainless steel
- Exterior light with exterior switch on cabinet face and operable on AESONE CONNECT
- Port configuration: Two rear wall access port and plug with 4in (76.2mm) diameter for ATP fixture and four 2in (50.8mm) diameter rear wall ports for additional sensors
- Equipped with AES SAFE Battery Safety Features. Safe up to EUCAR Hazard Level 7. A full list of included safety features is listed in the safety features tab.
Instrumentation
STANDARD INSTRUMENTATION
CONTROLLER 
SC Series Test Chambers have incorporated AESONE CONNECT® creating a robust connected device for a standard and uniform interface making test chamber remote monitoring easier.
AESONE XCHANGE is hardware internal to the chamber that increases your functionality
- Connects the test chamber controller to your network for increased accessibility
- On-board multi-year data logging
AESONE SOFTWARE gives you the power to
- Remote chamber operation and monitoring,
- Web-based test profile creation,
- Viewing current data and historical data visually
- Secure multi-level user access
ADDITIONAL ONBOARD INSTRUMENTATION
WATLOW F4T PROGRAMMABLE CONTROLLER. Features a 4.3” capacitive touchscreen minimizing the chance for error. Ethernet communication supported by AESONE HARDWARE. View more controller options
SENSORS
- TEMPERATURE SENSOR. Measured at the point of airflow entering the workspace. Class A, 3-wire, 100 Ohm Platinum RTD sensor
OPTIONAL DATA LOGGERS. View additional data loggers
Safety Features
STANDARD SAFETY FEATURES
Please Try Again.