<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=235002737667895&amp;ev=PageView&amp;noscript=1">
Menu
BD-100 Environmental Testing Chamber
Illustration of man next to  for scale
 Environmental Testing Chamber
Illustration of man next to  for scale

BD-100

Benchtop

Liquid Cooled Oven icon

The BD-100 Model is a liquid-cooled laboratory oven capable of providing highly-stable, controlled, forced hot air circulation with rapid cooling using liquid LN2 or CO2. 

BD-100 Model Laboratory Ovens provide dry, air-circulated heat as an environmental testing condition. The ability to maintain precise temperatures occur with help from direct, drive-powered fans. 

CONSTRUCTION.  These liquid-cooled laboratory ovens feature a durable powder-coat finish over heavy-gauge steel, with stainless steel internal construction, and highly-efficient, low K factor, thermal insulation, this is built to last for many years.

CIRCULATION SYSTEM.  The performance level operates the internal workspace temperature from approximately -73°C to +220°C (approximately -100.4°F to +428°F). 

HEATING SYSTEM.  The oven features an industry-leading heating system equipped with low-watt density, ceramic core, nichrome heaters for accurate temperatures within ±0.5°C, as measured at the sensor.

RAPID COOLING.  Liquid cooling will bring a hot oven down to ambient conditions and as low as  -73°C (-100°F) in just a couple of minutes. Pull-down rates for the liquid cooling process are much faster than traditional test chamber mechanical refrigeration.

BD Series Laboratory Ovens are ideal for: 

  • aging
  • baking
  • curing
  • drying
  • sterilizing
  • and more.

If rapid cooling is not a requirement, take a look at the BD-900 Models. 

INSTRUMENTATION. The standard BD models have a manual-set digital controller. For more sophisticated test profiles, upgrade incorporates AESONE CONNECT creating a robust connected device giving you a standard and uniform interface that makes operation easier. Learn more in the Instrumentation Tab below.

Buy $12,036 (base price)
Show More...
  • Specifications
  • Standard Features
  • Instrumentation
  • Safety Features
  • Optional Features
  • Downloads

Specifications

BD Series



Illustration of a 6-foot tall man
Height: 72" (6' tall)

BD-100 BD-900

BD-100
Height: 23"
Volume: 0.69 cu. ft.

BD-101 BD-901

BD-101
Height: 29"
Volume: 0.99 cu. ft.

BD-102 BD-902

BD-102
Height: 32"
Volume: 2.37 cu. ft.

BD-104 BD-904

BD-104
Height: 38"
Volume: 4.13 cu. ft.

BD-108 BD-908

BD-108
Height: 40"
Volume: 8 cu. ft.

BD-127 BD-927

BD-127
Height: 63"
Volume: 27 cu. ft.

BD-164 BD-964

BD-164
Height: 66"
Volume: 64 cu. ft.
Interior: 11.0W x 12.0D x 9.0H (in)
  279.4W x 304.7D x 228.6H (mm)
Exterior: 16.1W x 23.75D x 23.0H (in)
  409W x 603.3D x 584.2H (mm)
Volume: 0.69 cubic ft
  19.53 liters
Temperature: -73°C to 220°C (-99.4°F to 428°F)
Rise Rate*: 4.88°C/min
Pull Down Rate*: 9.6°C/min
Electrical Supply:  120 VAC, 1 PH, 60 HZ
Full Load Amps: 8 A
Power Requirement: NEMA 5-15
Refrigeration System:  Liquid cooled-no mechanical refrigeration
Mobility: Will fit through 36 in doorway
Approximate Product Weight: 135.0 lbs (61 kg) without added options
Approximate Shipping Weight: 245.0 lbs (111 kg) without added options

*Rise and pull-down rates calculated using IEC 60068-3-5 standard. Custom options available.

Standard Features

STANDARD FEATURES

  • Temperature Range: -73°C to +220°C (-99.4°F to +428°F)
  • Exterior cabinet: cold-rolled steel, heavy-gauge, powder coat finish, color: bone
  • Interior cabinet: stainless steel, type 304
  • Cooling type: LN2 (40 PSI)
  • Forced air circulation
  • Port configuration: left wall access port and plug with 2” diameter
  • Port configuration: right wall access port and plug with 2” diameter
  • Fully adjustable shelf, 1 wire-grid shelf, stainless steel
  • Fully opening door, manual door latch

Instrumentation

STANDARD INSTRUMENTATION

CONTROLLER

Temperature is manually set with one Watlow EZ-ZONE PM controller (non-programmable)

UPGRADE WITH

BD Series Test Chambers can incorporate AESONE CONNECT creating a robust connected device for a standard and uniform interface making test chamber operation easier.

AESONE XCHANGE increases your functionality   AESONE CONNECT allows for secure remote access to your test chamber and gives easy profile creation, operational control, and data management.

  • Connects the test chamber controller to your network for increased accessibility
  • On-board multi-year data logging

AESONE SOFTWARE gives you the power to

  • Remote chamber operation and monitoring, 
  • Web-based test profile creation, 
  • Viewing current data and historical data visually
  • Secure multi-level user access 

WATLOW F4T PROGRAMMABLE CONTROLLER. Features a 4.3” capacitive touchscreen minimizing the chance for error. Ethernet communication supported by AESONE HARDWARE. View more controller options

ADDITIONAL ONBOARD INSTRUMENTATION

SENSORS. 100 OHM Platinum RTD  is a highly-accurate sensor made from platinum components for increased sensitivity View sensor options

Safety Features

STANDARD SAFETY FEATURE

HIGH/LOW TEMPERATURE CONTROL. An adjustable temperature limit controller allows you to program the highest lowest temperature the device under test, protecting products from compromising temperature exposure.

Optional Features

  • Shelf Modification
  • Custom Porting Sizes
  • Cooling Type: CO2 1,000 PSIG (300 PSI available on request)
  • CO2 scrubber with replaceable cartridge, for 1,000 PSIG only
  • Additional Blank Door
  • Desiccant Air Dryer to ensure conditions as low as 5% RH 
  • Gas Purge compatible with Dry Nitrogen (GN2) & Compressed Dry Air (CDA)
  • Floor Stand w/ Casters

Downloads