The BD-902 Model is a laboratory oven capable of providing highly-stable, controlled, forced hot air circulation. BD-902 Laboratory Ovens are standard laboratory ovens that provide dry, air-circulated heat as an environmental testing condition. The heating system
CONSTRUCTION. These laboratory ovens feature a durable powder-coat finish over heavy-gauge steel, with stainless steel internal construction, and highly-efficient, low K factor, thermal insulation, this is built to last for many years.
CIRCULATION SYSTEM. The ability to maintain precise temperatures occur with help from direct, drive-powered fans. The performance level operates the internal workspace temperature from +38°C* to +220°C (100.4°F to +428°F).
HEATING SYSTEM. The oven features an industry-leading heating system equipped with low-watt density, ceramic core, nichrome heaters for accurate temperatures within ±0.5°C, as measured at the sensor.
BD Series Laboratory Ovens are ideal for:
INSTRUMENTATION. The standard BD Models have a manual-set digital controller. For more sophisticated test profiles, upgrade incorporates AESONE CONNECT creating a robust connected device giving you a standard and uniform interface that makes operation easier. Learn more in the Instrumentation Tab below.
With the popularity of rapid cooling, BD-902 Models have spawned a standard liquid-cooled model. Take a look at BD-100 Model Laboratory Ovens to incorporate liquid LN2 or CO2 cooling or cryogenic cooling into your laboratory oven.
Interior: | 16W x 16D x 16H (in) |
406.4W x 406.4D x 406.4H (mm) | |
Exterior: | 23.4W x 20.5D x 32H (in) |
594.36W x 520.7D x 812.8H (mm) | |
Volume: | 2.37 cubic ft |
67.11 liters | |
Temperature: | 38°C to 220°C (100.4°F to 428°F) |
Rise Rate*: | 4.88°C/minute |
Electrical Supply: | 120VAC, 1PH, 60HZ, |
Full Load Amps: | 14A |
Power Requirement: |
NEMA 5-15
![]() |
Mobility: | Will fit through 32" door |
*Rise and pull-down rates calculated using IEC 60068-3-5 standard. Custom options available.
Temperature is manually-set with one Watlow EZ-ZONE PM controller (non-programmable)
BD Series Test Chambers can incorporate AESONE CONNECT creating a robust connected device for a standard and uniform interface making test chamber operation easier.
AESONE XCHANGE increases your functionality
AESONE SOFTWARE gives you the power to
WATLOW F4T PROGRAMMABLE CONTROLLER. Features a 4.3” capacitive touchscreen minimizing the chance for error. Ethernet communication supported by AESONE HARDWARE. View more controller options
Adjustable Digital Set Limit Controller- Indicating High-Temperature Safety