The BHD-505 is a benchtop-style environmental test chamber for temperature and humidity testing. The chamber is designed to fit on your lab table and still have easy and safe access when you reach-in the workspace.
If you are concerned about losing your lab counter space, this test chamber has an optional floor stand for one chamber or get double the test workspace when you stack two BHD Test Chambers in the same footprint.
STRUCTURE. The internal workspace is lined with type 304 stainless steel for a vapor-tight internal construction. The exterior has a durable powder-coat finish over heavy-gauge steel for a long-lasting clean look. Between the two layers is highly-efficient, low k-factor, thermal insulation. This chamber is built to last for many years.
CIRCULATION SYSTEM. Air circulation is crucial for environmental testing. The BHD-505 Test Chamber has a proprietary baffle and fan design combination. This optimizes temperature and humidity conditions within the workspace.
HEATING SYSTEM. HD test chambers feature heating systems equipped with open ceramic-core nichrome heaters for reliable and accurate temperature control within ±0.5°C.
HUMIDITY SYSTEM. The humidity system has a standard range between 20% and 95%. To extend your humidity range, see the optional features section.
COOLING SYSTEM. The cooling system in the is BHD-505 consists of a self-contained, compact, single-stage, mechanical refrigeration system with an air-cooled condenser. An optional water cooling condenser is available.
Add boost cooling with liquid LN2 or CO2 to shorten pull-down times; it's a great option for stress tests that require rapid cooling.
INSTRUMENTATION. BD-505 Test Chamber incorporates AESONE CONNECT creating a robust connected device giving you a standard and uniform interface that makes operation easier. Learn more in the Instrumentation Tab below.
ALTERNATIVE TEMPERATURE RANGES:
|Interior:||20W x 22D x 20H (in)|
|508W x 558.8D x 508H (mm)|
|Exterior:||50W x 38D x 31H (in)|
|1270W x 965.2D x 787.4H (mm)|
|Volume:||5.092 cubic ft|
|Temperature:||-40°C to 180°C (-40°F to 356°F)|
|Humidity:||10-95%, limited by 4°C Td (98% add option)|
|Humidity Fluctuation:||+/-2% RH|
|Pull Down Rate*:||1.2°C/minute|
|Electrical Supply:||208VAC or 230VAC, 1PH, 50HZ or 60HZ,|
|Full Load Amps:||25A|
|Power Requirement:||NEMA L6-30|
|Mobility:||Will fit through 48" door|
*Rise and pull-down rates calculated using IEC 60068-3-5 standard. Custom options available.
BHD Series Test Chambers have upgraded to include AESONE CONNECT creating a robust connected device for a standard and uniform interface making test chamber operation easier.
AESONE XCHANGE increases your functionality
AESONE SOFTWARE gives you the power to
WATLOW F4T PROGRAMMABLE CONTROLLER. Features a 4.3” capacitive touchscreen minimizing the chance for error. Ethernet communication supported by AESONE HARDWARE. View more controller options
OPTIONAL DATA LOGGERS. View additional data loggers
Input your values and press calculate to see results.